Products > Surface centrifugal pumps > Horizontal, stainless steel, 1-2 stages, EBARA Italy

CD, 2CD

CDX, 2CDX

EBARA CD,2CD και CDX, 2CDX series

Single impeller centrifugal pumps manufactured from stainless steel AISI 304, suitable for water supply, treatment & irrigation. Air conditioning systems and general water pumping including moderately aggressive liquids.
SPECIFICATIONS
• Max capacity 15 m3/h, max head 71 m
• Max working pressure : 8 bar
• Max working temperature +35°C for domestic use
   60°C for other uses for CD 70/05-70/07-90/10
   90°C for all the rest
MATERIALS
• All wetted pars in AISI304
• Mechanical seal carbon/ceramic/NBR. Other options on request
MOTOR DATA
• 2 pole TEFC motor, isolation class F
• Protection IP55
• Voltage
• 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz
• For 3~ models, external thermal protection is required

CD, 2CD = inox motor       CDX, 2CDX = aluminum motor
CD, CDX = one state         2CD, 2CDX = two stage

Specifications CD
Specifications 2CD
Specifications CDX
Specifications 2CDX

MPC booster sets

EBARA DWO, DWC series

Open impeller centrifugal pumps with the hydraulic element manufactured from stainless steel AISI 304, suitable for suspended solids handling food process e.g. washing vegetables, meats, and fish. Industrial washing machines that may contain solids e.g. bottles, jars, glasses & crates. Process applications such as paint plants & general dirty liquid handling.

SPECIFICATIONS
• Max capacity 66 m3/h, max head 22 m
• Max working pressure : 8 bar
• Max working temperature +90°C
• Max solids passage 19mm
MATERIALS
• All wetted pars in AISI304
• Mechanical seal carbon/ceramic/NBR. Other options on request
MOTOR DATA
• 2 pole TEFC motor, isolation class F
• Protection IP55
• Voltage
• 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz
• For 3~ models, external thermal protection is required

DWC pumps have same specifications withe DWO but have closed type impeller. They are available with BSP inlet-outler (DWC-N) or with Victaulie 60,3 (DWC-V). No condensation: insulation as standard for Victaulic version (DWC-V). EPDM mechanical seal and elastomers as standard. Is the best choice for pumping cold water.

EBARA 3 series

End suction centrifugal pumps in accordance with EN 733 (ex DIN 24255) made of stainless steel AISI 304 (3 series) and AISI 316L (3L series), applications include water boosting, heating systems, air-conditioning, washing systems and many other industrial applications. WRAS approved pumps are available upon request.
SPECIFICATIONS
• Max capacity 132 m3/h, max head 71 m
• Max working pressure : 10 bar
• Max working temperature –10° to +90°C with NBR rubber parts
• Max working temperature –10° to +120°C with Viton rubber parts
MATERIALS
• All wetted pars in AISI304 (AISI316L for 3L series)
• Mechanical seal carbon/ceramic/NBR. Other options on request
MOTOR DATA
• 2 or 4 pole TEFC motor, isolation class F
• Protection IP55
• Voltage
• 1~230V ± 10% 50Hz up to 4kw , 3~400/690V for the rest
• For 3~ models, external thermal protection is required

3M, 3LM series have one-piece rotor and pump shaft
3S, 3LS series are with standard flanged B5 motor
3S, 3LS series are also availabe without motor (3SF, 3LSF series)
All pumps are also available as bare shaft (3PF, 3LPF series)

Specifications

MPC booster sets

EBARA 3LM80 series

Normalized pumps EN733 (Ex DIN24255) made of microcasted stainless steel AISI 316. Applications include water boosting, heating systems, air-conditioning, washing systems and many other industrial applications. WRAS approved pumps are available upon request.
SPECIFICATIONS
• Max capacity 240 m3/h, max head 95 m
• Max working pressure : 10 bar
• Max working temperature –20° to +120°C (depends on the version)
MATERIALS
• All wetted pars in AISI316
• Mechanical seal carbon/ceramic/NBR. Other options on request
MOTOR DATA
• 2 or 4 pole TEFC motor
• Isolation class F, protection IP55
• Voltage
• 3~230/400V ± 10% 50Hz to 4kw, 3~400/690V for bigger
• For 3~ models, external thermal protection is required