Products > Circulators, In-Line pumps >In-Line pumps DAB

ALM, ALP with threading

Circulation pump for hot or cold water with in-line connections, suitable for installation in series directly to the piping in civil and industrial heating, conditioning and hot water plants.
SPECIFICATIONS
• Max flow 8.4 m3/h, max head 21 m
• Installation: with motor in a horizontal position.
• For clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized, chemically neutral, close to the characteristics of water.
• Max working pressure : 10 bar
• Water temperature -15°C to +120°C
• Max ambient temperature +40°C
MATERIALS
• Pump body and support :
  Cast iron in ALM500, ALP200, Bronze ALM200, ALP800
• Impeller in technopolymer
• Shaft in stainless steel AISI303
• Mechanical seal Carbon/Cerarmic
MOTOR DATA
• Induction motor, closed and cooled with external ventilation
• 4 pole in ALM, 2 pole ALP
• Built-in thermal and overload protection and a capacitor in 1~ version
• Three-phase motors should be protected with overload protection
• Protection ΙΡ55, isolation class F
• Voltage 1~ 230V/50Hz, 3~ 230-400V/50HZ
• Other voltages on request
• Manufactured according to CEI 2-3 standards.

KLM, KLP flanged

Circulation pump for hot or cold water with in-line connections, suitable for installation in series directly to the piping in civil and industrial heating, conditioning, cooling and hot water plants.
SPECIFICATIONS
• Max flow 67 m3/h, max head 13.7 m
• Installation : with motor in a horizontal or vertical position as long as it is above the pump.
• For clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized, chemically neutral, close to the characteristics of water.
• Max working pressure : 10 bar
• Water temperature -15°C to +120°C
• Max ambient temperature +40°C
MATERIALS
• Pump body and motor support in cast iron.
• Flanged connections in PN10 with holes for control pressure gauges.
• Technopolymer impeller.
• Shaft in stainless steel AISI303
• Mechanical seal Carbon/Cerarmic
MOTOR DATA
• Induction motor, closed and cooled with external ventilation
• 4 pole in KLM, 2 pole KLP
• Built-in thermal and overload protection and a capacitor in 1~ version
• Three-phase motors should be protected with overload protection
• Protection ΙΡ55, isolation class F
• Voltage 1~ 230V/50Hz, 3~ 230-400V/50HZ
• Other voltages on request
• Manufactured according to CEI 2-3 standards.
Twin versions available : DKLM, DKLP

CM, CP flanged

Circulating pumps with IN-LINE connections, suitable for civil and industrial installations for heating, conditioning, refrigeration and clean and safe water. Available in single and twin version (DCM, DCP)

SPECIFICATIONS
• Max flow 390 m3/h, max head 68 m
• Installation : with motor in a horizontal or vertical position as long as it is above the pump.
• For clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized, chemically neutral, close to the characteristics of water.
• Max working pressure : 10 or 16 bar (depends on type)
• Water temperature -15°C to +120°C  or -15°C to +130°C 
• Max ambient temperature +40°C
MATERIALS
• Pump body and motor support in cast iron.
• Flanged connections in PN10 with holes for control pressure gauges.
• Cast iron impeller in CM (apart CM40-50), technopolymer in CP
• Shaft in stainless steel AISI304
• Mechanical seal Carbon/Cerarmic
MOTOR DATA
• Induction motor, closed and cooled with external ventilation
• 4 pole in CM, 2 pole CP
• Three-phase motors should be protected with overload protection
• Protection ΙΡ55, isolation class F
• Voltage 3~ 230-400V/50HZ
• Other voltages on request