Products > Submersible bore hole pumps & motors > Submersible pumps for wells

EBARA IDROGO, MULTIGO series

5" submersible centrifugal multistage pump made of stainless steel AISI 304 and noryl, suitable for the movement of clean water from wells, tanks for irrigation systems. The double mechanical seal ensures long life and improved reliability. There is no need for a starter box as the capacitors are installed in the pumping unit allowing a neater installation.
SPECIFICATIONS
• Max flow 7.2 m3/h, max head 84m
• For clean, non corrosive and non-abrasive liquids
• Max immersion depth 20m  (10 m for the types with float switch)
• Max ambient temperature (liquid) 40°C
MATERIALS
• Pump body and suction strainer in AISI304
• Impellers in technopolymer
• Shaft in stainless steel AISI416
• Double mechanical seal in oil bath
  NBR/SILICON/CARBON on pump side
  NBR/CERAMIC/CARBON on pump side
MOTOR DATA
• 2 pole, ΙΡ68, isolation class F
• Built-in capacitor and thermal protection in the 1~ version
• Στους τριφασικούς απαιτείται εξωτερικό θερμικό
• Cable PVC or H07RN0F 20m
• Voltage 1~ 220-230V/50HZ or 3~ 380–400V/50Hz
• Single phase models also availabe with float

DAB DIVER 

5” multistage submersible pumps with outer casing in AISI 304 stainless steel; encapsulated stator fi lled with inert gas avoiding the inflation of the inner casing and damages to rotor and shaft. This technology ensures that the motor can always be repaired. Cooling of the pump is ensured by the pumped liquid.
SPECIFICATIONS
• Max flow 12 m3/h, max head 100m
• For clean, non corrosive and non-abrasive liquids
• Max immersion depth 20m
• Max ambient temperature (liquid) 35°C
MATERIALS
• Pump body in AISI304
• Suction filter and impellers in technopolymer
• Shaft in stainless steel AISI304
• Double mechanical seal in oil bath
MOTOR DATA
• 2 pole, ΙΡ68, isolation class F
• Separate box with capacitor and thermal protection for the 1~ version
• 3~ version requires external therma protection
• Cable H07RN0F 10m
• Voltage 1~ 220-230V/50HZ or 3~ 380–400V/50Hz
• Single phase models also availabe with float

DAB PULSAR

The PULSAR electric pumps are used in systems for lifting clear water from wells, collecting tanks, septic tanks, Roman wells and watercourses and are suitable for providing pressurised water in domestic systems, small-scale farming and sprinkler systems for gardens and vegetable gardens. The pump is particularly silent and is installed inside wells or tanks to prevent suction and turn-off problems.
SPECIFICATIONS
• Max flow 7.2 m3/h, max head 86m
• For clean, non corrosive and non-abrasive liquids
• Max immersion depth 20m
• Max ambient temperature (liquid) 40°C
MATERIALS
• Pump body in AISI304
• Suction filter and impellers in technopolymer
• Shaft in stainless steel AISI304
• Double mechanical seal in oil bath
  NBR/SILICON/SILICON on pump side
  NBR/CERAMIC/CARBON on pump side
MOTOR DATA
• 2 pole, ΙΡ68, isolation class F
• Built-in capacitor and thermal protection in the 1~ version
• 3~ version requires external therma protection
• Cable H07RN0F 20m
• Voltage 1~ 220-230V/50HZ or 3~ 380–400V/50Hz
• Single phase models also availabe with float

Specifications Pulsar
Specifications Pulsar Dry
Brochure
English manual
Greek manual

DΑΒ IDEA
Single-impeller peripheral borehole pump for 4” wells or larger, capable of providing high heads with limited power. Suitable for water lifting and distribution applications in domestic systems, small agricultural concerns, pressurisation of pressure vessels and DIY uses.

SPECIFICATIONS
• Max flow 2.4 m3/h, max head 52 m
• For clean, non corrosive and non-abrasive liquids
• Max immersion depth 20m.
• Max ambient temperature (liquid) 35°C
MATERIALS
• Pump body in cast iron with epoxy coating and bronze impeller
• Stainless steel AISI431 rotor shaft extension
• Cast iron motor support.
• Double mechanical graphite/alumina
MOTOR DATA
• 2 pole, ΙΡ68, isolation class F
• Dry type, made completely of stainless steel
• 1~ models with control box with capaciton and thermal protection
• 3~ models should be thermaly protected by the user
• Cable H07RN0F 15m
• Voltage 1~ 220-230V/50HZ or 3~ 380–400V/50Hz
• All the pumps are supplied with a nylon rope 15 metres long.

         
  SE                  SA

DAB DIVERTON, DIVER 6

DIVERTON.  Bore-hole pumps with built-in integrated electronics. Pump body in technopolymer and stainless steel shaft. Available with 3 or 4 impellers in hard wearing technopolymer (silent running). Continuous service motor with overload cut out. Includes 15 m of cable with suko plug.

• Built-in electronic pressure switch and flow sensor
• Equipped with dry-run protection and built-in non returne valve
• Easy to use
• High reliability
• Available with 3 or 4 impellers
• Available with screen filter or stainless steel ring for use of suction kit

DIVER 6. Same as SE, but with float instead electronic pressure switch

AD DIVER 6. Special version for use with Ad Blue.