Products > Submersible pumps > AFEC Taiwan                         

FSR series, Bore 1” and 2”
Versatile and functional state-of-the-art design, start-up at and pump-down to a very low liquid level (2mm).

APPLICATIONS 
Removing or residue water.
Dewatering on construction sites.
Drainage of flat Surfaces on rooftops, parking, lots, utility pits, pools, basement, and etc.
MATERIALS
• Stainless steel outer casing
• Shasft in AISI 410
• Double mechanical seal (Sic/Siec + carbon/ceramic) in oil bath
SPECIFICATIONS
• Motor ς 0,5 ΗΡ, 1~ 220V, 50 Hz, 2850 rpm
• Isolation class F, protection ΙΡ 68.
• Max flow 13,8 m3/h.
• Max head 11 mΥΣ.
• Max liquid temperature 40 °C.

LB series, Bore 2” or 3”
Portable drainage pumps for domestic and light contactor use.

APPLICATIONS 
Effluent pumping applications with solids in suspention up to 8 mm.
ΥΛΙΚΑ ΚΑΤΑΣΚΕΥΗΣ.
• Pump body and impeller in cast iron
• Shaft in AISI 410.
• Double mechanical seal (Sic/Siec + carbon/ceramic) in oil bath
SPECIFICATIONS
• Voltage 1~ 220V up ot 1ΗΡ, or 3~ 380V, 50 Hz, 2850 rpm.
• Max flow 36 m3/h.
• Max head 20m
• Max liquid temperature 40 °C.
• Max immersion depth 8m
• Single phase models available with float switch

FSS series, Bore 1 ½” and 2”
Greatly versatile and functional state-of-the- art design, made to withstand even the most severe environments. Motor with cooling jacket.

APPLICATIONS 
Abrasion & corrosion resistance for sea water transfer and various irrigation purposes. Food and beverage processing, chemical transfer or drainage of sump containing chemicals. Wastewater discharge for households, industries, and small municipalities. Construction sites & civil engineering projects incl.: subways, tunnels, dams.
Utilities: telecommunications, power generation plants.
MATERIALS
• All wetted parts in stainless steel
• Shaft in AISI 410
• Double mechanical seal (Sic/Siec + carbon/ceramic) in oil bath
SPECIFICATIONS
• 2 pole motor with buit-in thermal protection in 1~ models
• Isolation class F, protection ΙΡ 68.
• Max flow 19,2 m3/h.
• Max head 14 mΥΣ.
• Max liquid temperature 40 °C.
• Max immersion depth 8m

FS series, Bore  2” to 6
Compact design, high performance and exceptional durability for handling abrasive liquid, widely used on general construction and civil engineering. Designed for continuous duty with stable operating performance to carry dirty or clean water, for drainage and irrigation purpose. It features an up-discharge and double-casing design and the motor is always cooled by the
pumped liquid, which gives it a superior cooling effect and long-lasting running no need to be personally attended on site.

APPLICATIONS
Wastewater discharge for industries and municipalities. Deep well pumping, construction sites, and civil engineering projects incl.: subways, tunnels, dams, and etc. Utilities: telecommunications, power generation plants. Also available in 440V/60HZ mor marine use.
MATERIALS
• Pump body and discharge cover in cast iron. 
• Impeller in high chrome steel
• Outer case in AISI304
• Shaft in AISI 410
• Double mechanical seal (Sic/Siec + carbon/ceramic) in oil bath
ΤΕΧΝΙΚΑ ΣΤΟΙΧΕΙΑ.
• 2 pole motor with buit-in thermal protection
• Isolation class F, protection ΙΡ 68.
• Max flow 150 m3/h.
• Max head 46 mΥΣ.
• Max liquid temperature 40 °C.
• Max immersion depth 8mm

LBV series, Bore 1 ½” to 3”
Submersible pumps with vortex impeller.

APPLICATIONS 
Raw sewage applications with solids up to 32 mm.
MATERIALS
• All cast iron construction
• Shaft in AISI 410.
• Double mechanical seal (Sic/Siec + carbon/ceramic) in oil bath
SPECIFICATIONS
• Voltage 1~ 220V up ot 1ΗΡ, or 3~ 380V, 50 Hz, 2850 rpm.
• Max flow 36 m3/h.
• Max head 18 mΥΣ.
• Max liquid temperature 40 °C.
• Max immersion depth 8m
• Single phase models available with float switch

Σειρά LBC, Bore 1 ½” to 3”
Submersible sewage pumps with single chanel impeller and cutter system.

APPLICATIONS  
As cutter pump to chop the solids in wastewater. Solids up to 45 mm.
MATERIALS
• All cast iron construction
• Shaft in AISI 410.
• Double mechanical seal (Sic/Siec + carbon/ceramic) in oil bath
SPECIFICATIONS
• Voltage 1~ 220V up ot 1ΗΡ, or 3~ 380V, 50 Hz, 2850 rpm.
• Max flow 36 m3/h.
• Max head 18 mΥΣ.
• Max liquid temperature 40 °C.
• Max immersion depth 8m
• Single phase models available with float switch

FBV series, Bore 2" to 4"
Submersible pumps with vortex impeller. Solids passage up t0 56mm.

APPLICATIONS  
Water treatment process in sewage treatment yards.
Draining from buildings and sanitary facilities.
Draining rain water.
Draining water treatment process at waste water treament yards.
Draining other sewage water.
MATERIALS
• All cast iron construction
• Shaft in AISI 410.
• Double mechanical seal (Sic/Siec + carbon/ceramic) in oil bath
SPECIFICATIONS
• 2 pole motor with buit-in thermal protection
• Max flow 72 m3/h.
• Max head 18 mΥΣ.
• Max liquid temperature 40 °C.
• Max immersion depth 10m

FBC series, bore 2" to 4"
Submersible sewage pumps with single chanel impeller and cutter system. Solids passage up to 70mm

APPLICATIONS  
Water treatment process in sewage treatment yards.
Draining from buildings and sanitary facilities.
Draining rain water.
Draining water treatment process at waste water treament yards.
Draining other sewage water.
MATERIALS
• All cast iron construction
• Shaft in AISI 410.
• Double mechanical seal (Sic/Siec + carbon/ceramic) in oil bath
SPECIFICATIONS
• 2 pole motor with buit-in thermal protection
• Max flow 72 m3/h.
• Max head 18 mΥΣ.
• Max liquid temperature 40 °C.
• Max immersion depth 10m