| SYDEX |
|
|
 Brochure
|
|
M
The range M are used for metering different kind of fluids. In order to the modular construction it’s possible to install with the same dimensions 3 different models. We are able to supply these models in the ATEX version. The range M, it’s available in the block version, with mechanical seal with all the components made by Aisi 316L and Hastelloy.
| Features: |
Applications: |
- High dosing accuracy.
- Delivery direction reversible.
- Self-priming rate high
- Stable pump - low pulsation.
- Modular construction – three different models in the same pump
- Various Installation possibilities.
- Easy maintenance and service
- Compact design and cost-efficient (Block design)
- Large choice of construction materials (Cast iron chassis’ SS316, Duplex, Stator: Viton, Nbr, Epdm)
|
- Metering flocculants - Waste Water and Sludge Treatment.
- Chemical and petrochemical Industry.
- Paper Industry
- Chemical additive’s Metering
- Food Industry (Distilleries and Brewing Industry, Fruit and vegetable processing, milk industry, oil industry, Meat and Poultry Processing)
- Cosmetic and Pharmaceutical Industry
- Wine industry
- Confectionery Industry
- Sugar Industry
- Ceramics Industry
- Varnish and dyeing industry
- ATEX
|
Capacity : up to 50 l/h - upto 13 gallons/h
Pressure : up to 18 bar
|
| |
|
|
|
|
FΜΡ, FMS (Free Moulded)
Compact and versatile, the FM range brings you all the advantages of progressing cavity pumps, in a small, compact and economical design.
| Features: |
Applications: |
- Wide range of flows: up to 10,000 LPH / Pressure: 4 bar
- High performance combined with efficient design
- Self priming ideal for suction lifts
- Lightweight and compact
- Low noise emissions
- Non-pulsating reliable flow
- Extremely simple maintenance
- Low cost of ownership
- Different material combinations available to suit applications.
|
- Waste water treat (Polymers, waste, sludge, flocculants)
- Chemical industry (detergents, varnish, paints, inks, soaps)
- Buildings (Cements, Bentonite)
- Agrofood industry (Creams, emulsions, wine, olive oils)
- Energy (Hydrocarbons, coolant and cutting oils, acids)
- Drainage applications
- Sampling duties
- Abrasive slurries
- Ideal for OEM pump applications
|
|
| |
|
|
|
|
LK
The range K it’s the state of the arte in manufacturing concepts. These pumps can be supplied with a range of materials and various rotor/stator geometries (1L, 1S, 2S and 4S), and in numerous application this range it’s the economical and technical best choice. Available also in ATEX version.
In order to the great versatility and its compact design the range K offers the top technological solution for the most varied applications allowing to be used in every industrial segment such as: Eviromental,Food, Beverage, Chemical, Petrochemical, Sanitary, Paint, Paper and Cellulose, Sugar and Alcohol industry and other.
| Features: |
Applications: |
- Max flow 300 m3/h
- Max head 24 bar
- Stable pump - low pulsation.
- Various Installation possibilities.
- Delivery direction reversible.
- Self-priming rate high
- Easy maintenance and service
- ATEX version available.
- Compact design and cost-efficient (Block design)
- Large choice of construction materials (Cast iron chassis’; SS304; SS316; SS316Ti, Duplex, etc)
|
- Waste Water and Sludge Treatment.
- Biogas
- Chemical and petrochemical Industry.
- Paper Industry
- Chemical additive’s Metering
- Dewatered sludge treatment
- Sludge and bilge dewatering
- Food Industry (Distilleries and Brewing Industry, Fruit and vegetable processing, milk industry, oil industry, Meat and Poultry Processing)
- Electroplating industry
- Textile industry
- Fish industry
- Cosmetic and Pharmaceutical Industry
- Agriculture
- Treatment of drinking water
- Wine industry
- Confectionery Industry
- Sugar Industry
- Shipbuilding
- Desulphurization of Fuel gas
- Ceramics Industry
- Varnish and dyeing industry
- Automotive Industry
- Construction
- ATEX
|
| Accessories: |
- Dry running protection with a device TSE.
- Feed Screw (For fluid in which the viscosity and the structure required a conveying before the stator)
- Overpressure Protection device (Diaphragm contact pressure gauge – adjustable contact for maximum pressure.
- Bypass circuit with Pressure relief Valve.
- Different number of sealing solutions (single mechanical seal; double mechanical seal, Unpressurized Quench vessel, cartridge unit; gland packing.
- Different number of baseplate solutions
|
|
| |
|
|
|
|
W
The W Range was especially developed for pumping highly viscous, low moisture or no fluidity products. All the pumps of this range has a hopper with auger to pump in a safe way the product. The range W it’s designed with a rectangular inlet housing and a conical forced-feed chamber as well as a coupling shaft with transport thread positioned for an optimized fluid transfer to the motor and the stator. Possibility of adjusting the rectangular inlet dimensions for specific applications
| Features: |
Applications: |
- Max flow 100 m3/h
- Max head 20 bar
- Stable pump - low pulsation.
- Hopper with auger
- Easy maintenance and service
- Available Block design and design with a housing bearing – That allows using all types of drives.
- Large choice of construction materials (Cast iron inlet housing; SS304; SS316; SS316Ti, Duplex, etc)
|
- Waste Water and Sludge Treatment.
- Biogas
- Chemical and petrochemical Industry.
- Paper Industry
- Dewatered sludge treatment
- Food Industry (Distilleries and Brewing Industry, Fruit and vegetable processing, milk industry, oil industry, Meat and Poultry Processing)
- Textil industry
- Fish industry
- Cosmetic and Pharmaceutical Industry
- Agriculture
- Wine industry
- Confectionery Industry
- Sugar Industry
- Shipbuilding
- Ceramics Industry
- Varnish and dyeing industry
- Construction
|
| Accessories: |
- Dry running protection with a device TSE.
- Overpressure Protection device (Diaphragm contact pressure gauge – adjustable contact for maximum pressure.
- Different number of sealing solutions (single mechanical seal; double mechanical seal, Unpressurized Quench vessel, cartridge unit (mechanical seal); gland packing.
- Different number of baseplate solutions
- Polymer dosing in the discharge piping for reduce charge losses generated by attrition between product and piping.
|
|
| |
|
|
|
|
G
The G Range was especially developed for pumping highly viscous, low moisture or no fluidity products. All the pumps of this range has a hopper with auger to pump in a safe way the product. The special Hopper design’s allows to avoid the expensive "bridge breaker”. The range G it’s designed with a expanded rectangular inlet housing and a conical forced-feed chamber as well as a coupling shaft with transport thread positioned for an optimized fluid transfer to the motor and the stator. Possibility of adjusting the rectangular inlet dimensions for specific applications.
| Features: |
Applications: |
- Stable pump - low pulsation.
- Expanded rectangular inlet housing and a conical forced-feed
- Easy maintenance and service
- Available Block design and design with a housing bearing – That allows using all types of drives.
- Large choice of construction materials (Cast iron inlet housing; SS304; SS316; SS316Ti, Duplex, etc)
|
- Waste Water and Sludge Treatment.
- Biogas
- Chemical and petrochemical Industry.
- Paper Industry
- Dewatered sludge treatment
- Food Industry (Distilleries and Brewing Industry, Fruit and vegetable processing, milk industry, oil industry, Meat and Poultry Processing)
- Textil industry
- Fish industry
- Cosmetic and Pharmaceutical Industry
- Agriculture
- Wine industry
- Confectionery Industry
- Sugar Industry
- Shipbuilding
- Ceramics Industry
- Varnish and dyeing industry
- Construction
|
| Accessories: |
- Dry running protection with a device TSE.
- Overpressure Protection device (Diaphragm contact pressure gauge – adjustable contact for maximum pressure.
- Different number of sealing solutions (single mechanical seal; double mechanical seal, Unpressurized Quench vessel, cartridge unit (mechanical seal); gland packing.
- Different number of baseplate solutions
- Polymer dosing in the discharge piping for reduce charge losses generated by attrition between product and piping.
|
|
| |
|
|
|
|
WL
The compact and robust design of the WL pump makes it ideal for transferring whole or destemmed grapes. And due to its design it can be installed right under the destemmer. Can be used also for the process of decanting.
| Features: |
Applications: |
- Max flow 50 m3/h
- Highly versatile.
- Easy to clean.
- Hopper with drain.
- Robust construction.
- Motor 3ph 230/400 V , 50 Hz, IP-55.
- Helical-bevel gear units.
- Pump mounted on trolley.
- CE electric panel with ON/OFF switch and emergency stop.
- Standard connection: spherical coupling.
- Rotary wheels with brakes.
|
- Wine industry
- Food industry
|
| Accessories: |
- Liquid detector Max / Min.
- Remote control.
- Frequency inverter.
- Connections Wine coupling, Clamp, Flanges, DIN, etc.
- Frequency inverter (Control Range).
|
|
| |
|
|
| ROTO |
|
|
|
|
RLAA
Bare shaft progressive cavity pumps.
APPLICATIONS
Thickened mud form biological treatment plants, sludge, bilge water, oils, ceramics, betoninte, paper pulps, molases, inks and other viscous liquids.
MATERIALS
• Pump body in GG25
• Stator NITRILE RUBBER,
• Chrome plated shaft
• Shaft sealing by soft packing
ΤΕΧΝΙΚΑ ΣΤΟΙΧΕΙΑ
• Bore DN50 to DN 200.
• Max flow 180 m3/h.
• Max pressure 4,5 bar.
Brochure
Specifications
|
