|
|
TMB
FEATURES
The pumps of this range are single stage, centrifugal, mag drive. Available in 5 versions, for flow from 15 up to 70 l/min.
CONNECTIONS
Threaded connections BSP and NPT - Hose connections for the model AM250
MOTORS
Single stage motors 220-240V bi-frequency 50-60 Hz.
UL version is available
MATERIALS
parts in contact with the liquid: PP + glass fibre
guide bushing: PTFE + glass fibre
O-Ring: FKM
screws: STAINLESS STEEL |
|
 Brochure |
| |
|
|
|
|
|
|
AM
MAIN FEATURES
The AM mag drive pumps have been developped on the structure of the old TM range in order to meet in a better way the market's requests.
Centrifugal pumps , horizontal, close-coupled, built using reinforced thermoplastic polymers, internal structure in ceramic oxides, high density carbon, fluorinated elastomers. No contact between liquid and metallic parts is forseen.
THREADS
Threads BSP and NPT - Flanged threads ISO-ANSI-JIS
Hose connections available for AM250
MOTORS
IEC motors B34, 2 pols (50-60 Hz), protection IP55
NEMA motors C-FLANGE, protection IP55
Ex-proof motors (EEx) B3, 2 poles (50-60 Hz), protection IP55
Upon request special motors available
MATERIALS
parts in contact with liquid: PP+glas // E-CTFE + carbon fibres
Guide bushing: Carbon HD // SiC //
Shaft: Ceramic
OR gasket: FKM
Screws: AISI 304
flange: STAINLESS STEEL
|
|
Brochure
|
| |
|
|
|
|
|
|
ROUTE
TMR : mag drive
ZMR : mechanical sealed (only G2)
FEATURES
Mag drive horizontal pumps (TMR) or mechanical sealed (ZMR) are able to work with NPHS negative. The internal structures allow the pumping of clean and slowly dirty liquids. In the mag drive pump TMR a PATENTED system allows the pump to run dry without damages for a long period of time.
CONNECTIONS
Threads BSP e NPT; ISO, ANSI, JIS
Upon request flanged connections ISO, ANSI, JIS DN40 inlet und outlet (only G2)
MOTORS
Motors IEC execution B35, 2 poles (50Hz-60Hz) , protection IP55
Motors NEMA execution C-FLANGE (60Hz) ,protection IP55
Motors ex-proof (EEx) B 35 with 2 poles (50Hz-60Hz) ; protection IP55
OTHER FEATURES
draining connection available upon request
the base available as optional
armour (standard in the G3, optional in the G2)
MATERIALS
parts in contact with liquids: PP+glass // E-CTFE + carbon fibre
guide bushing: CARB.HD // SiC // GFR PTFE
shaft: CER
mechanical seal: PTFE+V // CER // SiC // CARB // PTFE
OR gasket: FKM
screws: AISI 304
flanges: STAINLESS STEEL
TEMPERATURE
min. temperature: - 20°C (- 4°F)
max. temperature: 100°C (212°F)
environment temperature: -20 ÷ 40 °C (-4 ÷ 104 °F)
|
|
Brochure ROUTE G2
Brochure ROUTE G3 |
| |
|
|
|
|
|
|
FRONTIERA
VERSIONS
TMF : close coupled, mag drive
TGF : long coupled mag drive - according to ISO 2858
ZMF : close-coupled - mechanical seal
ZGF : mechanical seal - according to ISO 2858
FEATURES
Centrifugal pumps according ISO 2858 (DIN24256 - BS5257) in two versions: msg drive or mechanical seal. For both versions two different options, either close coupled or with long shaft. An armoured version in stainless steel is available.
CONNECTIONS
Flanged connections ISO, ANSI
MOTORS
IEC motors, B3 e B35 with 2 and 4 poles (50Hz-60Hz) , with powers from 3kW to 15kW , protection IP55
EEx motors (Ex-proof), B3 and b35 a 2 poli (50Hz-60Hz) , con potenze da 3kW a 15kW , protection IP55
Special motors available upon request
OTHER OPTIONS
Groud supports in stainless steel AISI 304
Flanges and armour in stainless steel
Base in stainless steel AISI 304
mag drive
Hydrodynamic balancing of impeller
Volute casing with double rear chamber
with mechanical seal
Possibility to use different mechanical seals produced by other manufacturers
MATERIALS
parts in contact with liquid:PP // E-CTFE
stif shell: GFR/POLYAMIDE
guide bushing: CARB.HD // SiC // CER
mechanical seal: PTFE+V // CER // SiC // CARB // PTFE
O-Ring: FKM //EPDM
support: CAST IRON
screws: AISI 304
armour: AISI 304
base: AISI 304
flange: AISI 304
|
|
Brochure |
| |
|
|
|
|
|
|
ZME
This pump belongs to the ZMF structure of the Frontiera range because they have the same hydraulic system and the same internal structure. The difference consists in a special shaft used for this range, connected in a simple ed economic way to the body of the pump.
CONNECTIONS
Threads ISO, ANSI , JIS
MATERIALS AND LIMITS OF WORK:
parts in contact with liquids: PP // E-CTFE
mechanical seal: PTFE+V // SiC // CER // CARB // PTFE
OR gasket: FPM // EPDM
screws: AISI 304
flanges, armour: INOX
MOTORS
Motors with special shaft, three-phase, multifrequency 50/60 Hz, protection IP55, insulation class F, powers 4 kW to 15 kW
Upon request special motors are available
|
|
Brochure |
| |
|
|
|
|
ΖΜΑ
ZGA |
|
VERSIONS
ZMA : mechanical sealed - close coupled
ZGA : mechanical sealed - long coupled
FEATURES
Horizontal pumps self-priming without need of valves. Simple of double mechanical seal. no metal parts in contat with the fluid, versatility and reliability; strong structure; possibility of pumping fluids with specific weight up to 1,8.
MOTORS
ZGA: UNEL-MEC, form B5, three-phase, multifrequency 50/60 Hz, protection IP55, insulation class F, powers from 0,75 kW to 11 kW.
- ZMA: motors with special shaft, three-phase, multifrequency 50/60 Hz, protection IP55, insulation class F, powers from 0,75 kW to 11 kW.
- Upon request monophase motors or those with special voltage.
MATERIALS
parts in contact with liquids: PP // PVDF // PVC
OR gasket: FKM // EPDM
mechanical seal: CER // SiC // CARB // PTFE
|
|
Brochure |
| |
|
|
|
|
|
|
ZGE
FEATURES
Centrifugal pumps made in compliance with ISO2858 ( DIN24256 - BS5257 - NFE44121); they are particularly used in heavy duty processes. Being the whole structure normalised, main feature is the interchangeability of the components.
APPLICATIONS
The pump is suitable acids, hydroxids, salts in different solutions, galvanic baths, aromatic hydrocarbons, chlorides, alchool.
CONNECTIONS
Threads ISO, ANSI, JIS
MOTORS
Motors with IP55 protection, insulation class F, tree-phase, powers from 0.25 kW up to 315 kW; specific requests can be met.
MATERIALS
parts in contact with liquid: PP // PVDF // PVC // PE
mechanical seal: PTFE+V // CER // SiC // CARB //
OR gasket: FKM //EPDM // FEP
support: CAST IRON
base: STEEL
flange: CAST IRON
|
|
Brochure
Curves
|
| |
|
|
|
|
|
|
ZM
FEATURES
Specifically designed to handle chemical and corrosive fluids. The whole structure has been conceived in order to make all the components extremely resistant to the aggression, even in the smallest parts.
The pump is clos coupled and the parts are supported by the motor, therefore the dimensions are restricted. Front suction, central upward delivery, mechanically sealed with sliding counterfaces (with an external, single or double flush) or radial elastic.
These are optimal when needed to transfer chemicals with a specific gravity up to 1,8. Three different motors are available for each model. The impeller is open, so there is no contraidication to transfer liquids containing solids in suspension.
CONNECTIONS
Threads BSP
Flanged ISO, ANSI
MOTORS
Motors with special shaft, three-phase, multifrequency 50/60 Hz, protection IP55, insulation class F, powers 0,75 kW to 7,5 kW
Upon request special motors are available
MATERIALS AND LIMITS OF WORK:
parts in contact with liquids: PP // PVC // PVDF
mechanical seal: PTFE+V // SiC // CER // CARB // PTFE
OR gasket: FKM // EPDM // FFKM
screws: AISI 304
base (optional): INOX
|
|
Brochure |
